Video Accessories
Cables
cable
 
IAS Products Ltd. offers two standard lengths of underwater video cable. Both 96 foot and 128 foot cable assemblies have been signal matched for maximum video image quality at the monitor. Custom lengths are also available. Cable is constructed with a tough polyurethane jacket designed for long term immersion in water. Each of the three internal conductor wires is constructed of a 41/35 strand count to insure maximum flexibility in a moving environment. The underwater video plug consists of an over moulded body with fitted gold plated terminal pins with the above surface video plug being a field serviceable IP68 rated plug and cap assembly fitted with a changeable gold plated 3-pin insert assembly. IAS Products Ltd. warrants this cable in normal usage for a two-year period according to our standard warranty terms.
SeeMate™ Power Inverter
and Video Harness
ac
Try out our most cost-effective means of powering and viewing the image from any SeeMate™ Underwater Video Camera. Using our SeeMate™ Power Inverter and Video Harness simply connect the harness's Bulgin IP68 rated male plug to the matching female receptacle found on any SeeMate™ camera cable. Plug the inverter into a 110-volt AC receptacle and watch the video image on any 110-volt AC monitor or T.V. of your choice using the harness supplied RG-59 video cable and connector.

SeeMate™ P.I.B. -
Portable Interface Box

pib box
The SeeMate™ P.I.B. is designed as a small stand-alone weatherproof enclosure to assist an operator in accessing the standard SeeMate™ IP66 rated power/video plug assembly found on all SeeMate™ model camera cables. Where space is limited, this SeeMate™ P.I.B. is offered as an alternative to the larger multiple channel/camera access SeeMate™ C2-12, C4-12 and Portable models. While this SeeMate™ P.I.B. is capable of connecting only one camera, it provides a user with the ability to power a b&w monitor with a breaker protected power plug that is standard with this matter.
The SeeMate™ P.I.B. offers the user with complete onboard power management circuitry to insure maximum battery life. This circuitry insures that, when battery discharge voltage drops below 11.0-volts DC, the internal low voltage shut-off circuitry automatically turns off the complete camera/monitor system. The camera receptacle on the outside of the enclosure uses our standard field serviceable Bulgin™ video plug receptacle that offers the advantage of quick diagnosis and ´plug and play´ replacement without specialised tools or training. Every SeeMate™ P.I.B. comes with a power supply cable fitted with alligator clips for quick connection to a battery or other 12-volt DC power source. A large toggle switch knob, protected with a weatherproof rubber boot, allows for gloved hand control. This switch is matched with a bright LED power indictor light.

 

foot


© Copyright IAS Products Ltd. 2002-2010