Proprietary computer control software monitors multiple underwater
cameras and tracks feed pellets moving across the monitor screen in exactly the same manner as a farm operator. Uneaten feed pellets are identified on
the video screen, time stamped, logged and saved for review. When operators are comfortable with the consistency and accuracy of SeeView™
AQM, the system can be authorized to directly control the feed gate on the feed broadcaster at the camera location.
As farm sites increase in size a farm operator’s ability to monitor feed consumption using underwater cameras grows more complex. The physical task of
moving from cage to cage to observe video camera images becomes more difficult, time consuming, and wearing. This process slows feeding schedules
as the number of camera operators directly affects the number of cameras that may be observed and acted upon. SeeView™ AQM frees operators to
carry out other high value fish husbandry tasks and is a valuable tool for improving feeding schedules. The use of SeeView™ AQM advances the use of
existing farm cameras by allowing multiple cameras images to be monitored simultaneously for unconsumed feed pellets. The SeeView™ AQM is focused on
monitoring uneaten fish feed, as it is a direct cost to farm operators, unhealthy for the environment and of no benefit to the maximization of fish growth.
Exclusive
Features
| |
n
SeeView™ AQM operates using existing farm site cameras and builds on operator knowledge around current camera use and feed pellet control;
n
What SeeView™ AQM sees and considers as uneaten feed pellets is saved and time stamped for operator review and evaluation;
n
Monitor screen shows yellow X over pellets observed in the live video camera image. Indicating to the operator that uneaten pellets are detected but the threshold has not been met.
A warning to the operator that attention at that camera location is pending;
n
Monitor screen shows red X over pellets observed in the live video camera image indicating that uneaten pellets have been detected and the threshold has been met.
Operator action required to adjust or close the feed gate;
n
Operators can set SeeView™ AQM to monitor for high, medium, and low pellet thresholds to address site conditions or operating requirements;
n
When assurances met that SeeView™ AQM properly monitors for uneaten feed pellets the operators can authorize SeeView™ AQM to directly control the feed gate on the feed broadcaster at the camera location.
|
Benefits:
|
| |
n
Multiple Cage Feeding. Simultaneous cage feeding as required to maximize early day and late evening feeding events;
n
Cost Effective. Maximizes the use of existing underwater camera equipment;
n
Feed Control. Full utilization of feed pellets ;
n
Minimum Training. The use of SeeView™ AQM video camera technology builds on existing operator knowledge base. Simple screen prompts guide operator through all steps;
n
IAS Support. All SeeView™ products come with our standard one (1) year manufacturer’s warranty.
|
|
Support:
Technical
support on all IAS products is available by telephone between the hours
of 08:00 and 17:00 Pacific Standard Time, Monday to Friday by calling
+1 604 924-1844
Parts and repairs are available from IAS or Authorized Service Providers
in your area.
Warranty:
IAS Products Ltd. warrants product of its own manufacture against
defects in materials and workmanship for a period of twelve (12) months
from the date of shipment. This warranty does not apply if the goods
have been damaged by accident, abuse, misuse, modification, misapplication,
by damage during shipment, or by improper service or storage. Our obligation
under this warranty is limited to repairing or replacing, at our option,
without charge, F.O.B. our place of business, any part of our own manufacture
which is proven to have been defective at the time of shipment provided
the Buyer i). provides immediate written notice at the time such defect
is discovered. ii). establishes its normal use and service of the product,
and iii). returns the defective equipment or product, transportation
prepaid, to establish the claim. IAS Products Ltd. shall in no case
be responsible for labour charges, lost production, damages or delays
as a result of such defects.
Contact:
IAS Products Ltd.
1415 Dominion Street
North Vancouver BC
Canada V7J1B3
Telephone:
+1 604 924-1844
Facsimile:
+1 604 924-1848
Email: info@iasproducts.com
Web Site:
www.iasproducts.com
Although IAS Products Ltd.
makes every effort to ensure the accuracy of these product specification
sheets at the time of publication, specifications for products described
in this publication are subject to change without notice. No warrant
for customer applications or usage is implied. IAS Products Ltd.
makes no representation that the goods comply with any present or future
federal, state, provincial, or local ordinance. Compliance is the Buyer’s
responsibility.
|
