Fish Farm Aquaculture Underwater Lights

SeeBrite™ II SBAH 1000 watt
Underwater All-in-Head CWI Lighting System

The SeeBrite™ II is our largest most powerful 1000-watt Light Systems identified as the SeeBrite™ II SBAH-1000. The new SeeBrite™ II SBAH model offers an easy to install waterproof underwater light source by placing all electrical components inside a compact mono-cast polyurethane molded housing. Simply hang the lamp in the desired location and plug the power cable into any suitable AC outlet or directly into an electrical service panel.

Each SeeBrite™ Underwater Lighting System provides maximum production, reduced life cycle costs and simple and safe installation. Production is maximised through the use of high intensity metal halide lamps which maximise brightness and closely simulate natural sunlight for maximum effect. All-in-Head design eliminates loose underwater connections, corrosion, and reduces field failures, maximising production. Life cycle costs are reduced by the use of a complete lamp-centering support guide that protect the SeeBrite™ dome and lamp against rough handling and day-to-day pen activity.

Exclusive Features:

		n A complete mono-cast polyurethane light system that molds all electrical components into a single waterproof light head fixture; n Non-conductive, non-corrosive housing insures maximum operator safety and product longevity in a variety of environments; n Molded light head includes an integrated stainless steel lift hoop for hanging purposes; n Large boron silicate glass dome sized to accept a range of metal halide lamp styles including the most common ED37 lamp; n Lamp centering guide to eliminate lamp damage during handling and operation; n Provides up to120, 000 lumens at 1000-watts to address the largest cage systems; n 12 gauge 2 conductor polyurethane jacketed cable for prolonged immersion in water; n Power cable manufactured using high conductor wire strand count for maximum cable flexibility in moving water; n Choice of direct wiring or options in power plug types to best match site wiring requirements.

Benefits:

		n Greater Flexibility. Mono-cast design places the ballast with the lamp allowing for increased electrical cable lengths from the power source and greater site installation flexibility. n Improved Safety. The all-in-head ballast design removes remote ballasts from walkways and handrails freeing up space and reducing weight on floats and cages. n Long Service Life. Light head design allows for power cable replacement to address field damage or the need to reconfigure cable runs to meet new farm layout requirements. n Low Installation Costs. Standard 120-volt AC electrical plug allows operators to use existing site electrical system with minimum or no upgrade requirements. n Compact Size. Improves handling and site installation n Tough Design. A thick polyurethane jacketed cable covering two (2) high strand count 12-gauge wires eliminate cable fatigue and down time due to conductor wire breakage. n Safety First. A thick polyurethane jacket cover in safety red insures rough service protection against mechanical damage and high visibility in all site applications. n IAS Support. All *SeeBrite™* products come with our standard one (1) year manufacturer s warranty backed with on-line parts and technical service.

Specifications SeeBrite™ II Underwater Light

Note that all SeeBrite™ Metal Halide Underwater Lights use a CWI ballast that complies with Canadian and North American electrical codes for Pool Luminaries operating at no more than 150-volts AC. Most models of underwater lighting produced by IAS Products Ltd., including this SeeBrite™ II SBAH-1000 model can be configured with alternative ballasts to meet regional electrical codes as required for worldwide distribution.

Lamp:	Watt	Bulb	Base	Rated	Initial	CRI	CCT
				Av.Life (hr)	Lumens		(K)

	1000	BT 37	Mogul	15,000	120,000	65	4000

Ballast:	Input	Circuit	Amps@	Freq.	Capacitor	CSA/UL/QAI
	Volts	Type	120/240	Hz.	Type

	120/220/240	CWA	9.3/5.0/4.5	50	Short Range	TBA
	120/240	CWI	10.0/5.0	60	Short Range	Approved

Cable:	Length (m/ft)	Dimensions	Jacket	Construction (tint plated copper)	Conductors Count/Gauge

	20/70 or 30/100 or 40/130	0.048 O.D	Polyurethane Safety Red	41 x 0.245 mm	2/14
	Custom to 60/200	0.048 O.D	Polyurethane Safety Red	65 x 0.245 mm	2/12

All-in-Head:

Construction:

Mono-cast polyurethane

Length (with stainless hanger):

101.5 cm (40.0 in)

Width:

20.3 cm (8.0 in)

Weight:

23.6 kg (55.0 lbs)
Floating: 16.0 kg (33.0 lbs)

Dome:

Boron silicate glass:
14.0cm (5.5 in) diameter
34.9 cm (13.75 in) long
6.0 mm (15/64 in) wall thickness

Centering Guide:

Extreme temperature fibre board

Plugs:

- Waterproof Bulgin Connector: 600 volt @ 25 amp, IP68 rated;
- 515R or 515LR

Support: Technical support on all IAS products is available by telephone between the hours of 08:00 and 17:00 Pacific Standard Time, Monday to Friday by calling
+1 604 924-1844.
Parts and repairs are available from IAS or Authorized Service Providers in your area.

Warranty: IAS Products Ltd. warrants product of its own manufacture against defects in materials and workmanship for a period of twelve (12) months from the date of shipment. This warranty does not apply if the goods have been damaged by accident, abuse, misuse, modification, misapplication, by damage during shipment, or by improper service or storage. Our obligation under this warranty is limited to repairing or replacing, at our option, without charge, F.O.B. our place of business, any part of our own manufacture which is proven to have been defective at the time of shipment provided the Buyer i). provides immediate written notice at the time such defect is discovered. ii). establishes its normal use and service of the product, and iii). returns the defective equipment or product, transportation prepaid, to establish the claim. IAS Products Ltd. shall in no case be responsible for labour charges, lost production, damages or delays as a result of such defects.

Contact: IAS Products Ltd.
1415 Dominion Street
North Vancouver BC
Canada V7J1B3

Telephone: +1 604 924-1844
Facsimile: +1 604 924-1848
Email: info@iasproducts.com
Web Site: www.iasproducts.com

Although IAS Products Ltd. makes every effort to ensure the accuracy of these product specification sheets at the time of publication, specifications for products described in this publication are subject to change without notice. No warrant for customer applications or usage is implied. IAS Products Ltd. makes no representation that the goods comply with any present or future federal, state, provincial, or local ordinance. Compliance is the Buyer’s responsibility.