All AutoSpreader™ S44 and S66 Hatchery Feeder models are designed for positioning on the top edge of any 10 to 40 foot (3 to 12.5 meter) diameter tank. A high torque drive motor and programmable control module manage a center-less auger positioned inside a self-supporting feed delivery tube that runs the full diameter of the tank. Each tough plastic delivery tube is manufactured with a number of strategically placed feed dispensing slots to insure a uniform drop of feed across the entire surface of the tank. This design insures minimum feed competition and maximum fish growth with no feed breakage or compaction within the tube.

The AutoSpreader™ Hatchery Feeder is manufactured using marine aluminum, stainless steel and heavy walled PVC plastic with two standard model sizes offered. A 100 or 146-pound (44 or 66-kilo) hopper designed to insure a low lift height for feedbag loading. Alternative sized hoppers and a number of feed delivery tube lengths are available to best match your tank size, specific feed volumes and stocking density requirements.

All AutoSpreader™ Hatchery Feeders are matched with a reliable controller that may be set for scheduled or continuous feed dispensing using the 120 or 220 volt AC 50/60 Hz high torque drive motor. Variations include the ability to access through a wireless network