The IAS Bulk
Feed Loader™ helps maximise farm production, minimise
labour costs and improve farm safety with controlled handling and loading
of bulk feed bags. This equipment is easy to use, requiring only two
levers to operate, providing complete self-loading ability with one
tonne (2200lb) Bulk Bags. The high transfer rate of twelve (12) tonnes
per hour minimises labour costs for feed loading. The Bulk
Feed Loader™ conveyor is designed to be "gentle" on feed,
reducing feed breakage and improving feed conversions ratios. The simplicity
of operation ensures that farm operators can be quickly and safely trained,
providing additional long term costs savings that reduce life cycle
costs. The lightweight marine grade aluminum construction used in the
hopper and conveyor require less floatation and maintenance, again reducing
life-cycle costs. This system is designed to eliminate or minimize any regular
maintenance and is limited to greasing the pivot joints, drum bearings, and
servicing the Honda motor.
Exclusive
Features
| |
n
Constructed of marine grade aluminum, galvanized steel and stainless
steel fittings.
n
Stand alone and movable Hydraulic Control Pedestal mounted on
non-slip rubber feet for optimum positioning.
n
All the Hydraulic hose and valve fittings are wrapped in anti
corrosion tape.
n
Hydraulic cylinder rods are chrome plated.
n
The Honda powered Hydraulic Power Pack, including its oil tank,
is independently mounted in an open frame and supported on anti
vibration rubber feet.
n
The Hydraulic Power Pack hoses are coupled to the loader assembly
with quick-connect fittings and a 20 feet of hydraulic hose for
positioning out of the immediate work area and ear shot.
n
The conveyor belt is driven by a constant speed hydraulic motor
via chain and sprocket, this allows the belt speed to be altered
with a simple sprocket change to meet feed delivery rate requirements.
n
The Bulk Bag hydraulic lift arm cylinders are metered to lift
and drop at a measured rate controlling the movement for safety
considerations.
n
The conveyor is fitted with a complete set of removable safety covers
and a head box to smoothly guide the mfeed pellets into the receiving hopper.
n
The conveyor lift is hydraulically adjusted to any angle up to
a maximum descharge head height of nine feet above ground level.
n
The conveyor loader base rails are mounted on 2"x 6" pressure
treated lumber to isolate, protect and to restrict movement while
operating.
n
Hydraulic Power Pack supplied with environmentally friendly Canola based hydraulic oil.
|
|
Specifications
Bulk Feed Loader™
|
|
Capacity: |
|
One (1) tonne feed bag
|
| |
Discharge Rate: |
|
Twelve (12) tonnes per hour.
|
| |
Weight: |
|
500kg (1,100lb) including the Power
Pack and Loader System
|
| |
Dimensions: |
|
56 in (1.43 m) wide x18 ft
(5.5 m) long, with a minimum height of 78 in. The standard
length of the conveyor is 14.5 ft (4.5 m), from center to center
of the drum rollers.
|
| |
Reach: |
|
Conveyor reaches 244cm (8 ft) forward
of the frame rails, with a standard 4.5 m (15 ft) conveyor length.
|
| |
Power: |
|
Hydraulic Power Pack drive is driven
by a Honda 6.5HP GX 200, with a directly coupled gear pump supplied
by a 34 Litres (7.5 gallon) oil tank. The frame, base and the oil
tank are fabricated in marine aluminum. The Honda gas motor is fitted
with low oil alert.
|
| |
Materials: |
|
Conveyor support base is constructed
of 4 in x 6 in x 1/2 in marine Aluminum angle. (102 mm x
152 mm x 12.7 mm) The bag lift arms are 2 in x 4 in x 1/4
in HSS hot dipped galvanized steel with stainless steel pivot
pins. (50.8 mm x 102 mm x 6.4 mm) Conveyor belt slide is fully lined
with HDPE, for minimum slide resistance and maintenance.
|
| |
Options: |
|
- Hydraulic Power Pack drive may be diesel powered;
- Conveyor length, lift length and feed delivery rate may be specified to meet customer needs.
|
|
Support:
Technical
support on all IAS products is available by telephone between the hours
of 08:00 and 17:00 Pacific Standard Time, Monday to Friday by calling
+1 604 924-1844
Parts and repairs are available from IAS or Authorized Service Providers
in your area.
Warranty:
IAS Products Ltd. warrants product of its own manufacture against
defects in materials and workmanship for a period of twelve (12) months
from the date of shipment. This warranty does not apply if the goods
have been damaged by accident, abuse, misuse, modification, misapplication,
by damage during shipment, or by improper service or storage. Our obligation
under this warranty is limited to repairing or replacing, at our option,
without charge, F.O.B. our place of business, any part of our own manufacture
which is proven to have been defective at the time of shipment provided
the Buyer i). provides immediate written notice at the time such defect
is discovered. ii). establishes its normal use and service of the product,
and iii). returns the defective equipment or product, transportation
prepaid, to establish the claim. IAS Products Ltd. shall in no case
be responsible for labour charges, lost production, damages or delays
as a result of such defects.
Contact:
IAS Products Ltd.
1415 Dominion Street
North Vancouver BC
Canada V7J1B3
Telephone:
+1 604 924-1844
Facsimile:
+1 604 924-1848
Email: info@iasproducts.com
Web Site:
www.iasproducts.com
Although IAS Products Ltd.
makes every effort to ensure the accuracy of these product specification
sheets at the time of publication, specifications for products described
in this publication are subject to change without notice. No warrant
for customer applications or usage is implied. IAS Products Ltd.
makes no representation that the goods comply with any present or future
federal, state, provincial, or local ordinance. Compliance is the Buyer’s
responsibility.
|
